HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 37

port bridge enable Syntax port bridge enable View undo port bridge enable Ethernet interface view Default level 2: System level Parameters None Description Use port bridge enable to enable bridging on a Ethernet interface. Use undo port bridge enable to disable bridging on the Ethernet interface. By default, bridging is not enabled on Ethernet interfaces. Examples # Enable bridging on Ethernet interface GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port bridge enable reset counters interface Syntax View reset counters interface [ interface-type [ interface-number ] ] User view Default level 2: System level Parameters interface-type: Specifies an interface type. interface-number: Specifies an interface number. Description Use reset counters interface to clear the Ethernet interface statistics. Before collecting traffic statistics for a specific period of time on an interface, clear the old statistics first. • If no interface type is specified, this command clears statistics for all interfaces. • If only the interface type is specified, this command clears statistics for all interfaces of that type. Examples # Clear the statistics of GigabitEthernet 1/0/1. 29