HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 152

port access vlan Syntax port access vlan vlan-id View undo port access vlan Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters vlan-id: Specifies a VLAN ID, in the range of 1 to 4094. Verify that the VLAN specified by the VLAN ID already exists. Description Use port access vlan to assign the access ports to the specified VLAN. Use undo port access vlan to restore the default. By default, all access ports belong to VLAN 1. The configuration made in Layer 2 Ethernet interface view, applies only to the port. The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its aggregation member ports. • If the system fails to apply the configuration to the aggregate interface, it stops applying the configuration to aggregation member ports. • If the system fails to apply the configuration to an aggregation member port, it skips the port and moves to the next member port. Examples # Assign GigabitEthernet 1/0/1 to VLAN 3. system-view [Sysname] vlan 3 [Sysname-vlan3] quit [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port access vlan 3 # Assign Layer 2 aggregate interface Bridge-Aggregation 1 and its member ports to VLAN 3. system-view [Sysname] vlan 3 [Sysname-vlan3] quit [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] port access vlan 3 port hybrid pvid Syntax port hybrid pvid vlan vlan-id undo port hybrid pvid 144