HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 226
lldp encapsulation snap, lldp fast-count, Disable LLDP on GigabitEthernet 1/0/1.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Description Use lldp enable to enable LLDP. Use undo lldp enable to disable LLDP. By default, LLDP is enabled on a port, and enabled globally. LLDP takes effect on a port only when LLDP is enabled both globally and on the port. Examples # Disable LLDP on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] undo lldp enable lldp encapsulation snap Syntax lldp encapsulation snap View undo lldp encapsulation Layer 2 Ethernet interface view Default level 2: System level Parameters None Description Use lldp encapsulation snap to configure the encapsulation format for LLDPDUs as SNAP on a port. Use undo lldp encapsulation to restore the default encapsulation format for LLDPDUs. By default, the encapsulation format for LLDPDUs is Ethernet II. NOTE: The command does not apply to LLDP-CDP packets, which use only SNAP encapsulation. Examples # Configure the encapsulation format for LLDPDUs as SNAP on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] lldp encapsulation snap lldp fast-count Syntax lldp fast-count count undo lldp fast-count 218