HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 22
display packet-drop interface
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Examples # Display information about loopback detection. display loopback-detection Loopback detection is running. Detection interval is 30 seconds. No port is detected with loopback. Table 7 Command output Field Detection interval time is 30 seconds. No port is detected with loopback. Description Loopback detection interval is 30 seconds. No loops are detected on ports. display packet-drop interface Syntax display packet-drop interface [ interface-type [ interface-number ] ] [ | { begin | exclude | include } regular-expression ] View Any view Default level 1: Monitor level Parameters interface-type: Specifies an interface type. interface-number: Specifies an interface number. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display packet-drop interface to display information about packets dropped on an interface or multiple interfaces. • If you do not specify an interface type, this command displays information about dropped packets on all the interfaces on the switch. • If you specify an interface type only, this command displays information about dropped packets on the specified type of interfaces. • If you specify both the interface type and interface number, this command displays information about dropped packets on the specified interface. Examples # Display information about dropped packets on GigabitEthernet 1/0/1. 14