HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 151

Table 34 Command output Field Interface PVID VLAN passing Tagged Untagged Description Port name PVID of the port VLANs for which the port allows packets to pass through VLANs for which the port sends packets without removing VLAN tags VLANs for which the port sends packets after removing VLAN tags port Syntax port interface-list View undo port interface-list VLAN view Default level 2: System level Parameters interface-list: Specifies an interface list, in the format of interface-list = { interface-type interface-number [ to interface-type interface-number ] }&, where interface-type interface-number represents the interface type and interface number and & indicates that you can specify up to 10 interface-type interface-number [ to interface-type interface-number ] parameters. Description Use port to assign the specified access ports to the VLAN. Use undo port to remove the specified access ports from the VLAN. By default, all ports are in VLAN 1. This command is applicable only on access ports. By default, all ports are access ports. However, you can manually configure the port type. For more information, see "port link-type." You cannot assign Layer 2 aggregate interfaces to a VLAN. Related commands: display vlan. Examples # Assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to VLAN 2. system-view [Sysname] vlan 2 [Sysname-vlan2] port gigabitethernet 1/0/1 to gigabitethernet 1/0/3 143