HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 71

Ethernet link aggregation configuration commands default Syntax View default Layer 2 aggregate interface view Default level 2: System level Parameters None Description Use default to restore the default settings for an aggregate interface. CAUTION: The default command might interrupt ongoing network services. Make sure you are fully aware of the impacts of this command when you perform it on a live network. This command might fail to restore the default settings for some commands for reasons such as command dependencies and system restrictions. You can identify these commands by using the display this command in interface view, and then use their undo forms or follow the command reference to individually restore their default settings. If your restoration attempt still fails, follow the error message to resolve the problem. Examples # Restore the default settings for Layer 2 aggregate interface Bridge-Aggregation 1. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] default This command will restore the default settings. Continue? [Y/N]:y description Syntax description text View undo description Layer 2 aggregate interface view 63