HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 130
stp tc-protection threshold, stp tc-snooping
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Description Use stp tc-protection enable to enable the TC-BPDU attack guard function for the device. Use stp tc-protection disable to disable the TC-BPDU attack guard function for the device. By default, the TC-BPDU attack guard function is enabled. Examples # Disable the TC-BPDU attack guard function for the device. system-view [Sysname] stp tc-protection disable stp tc-protection threshold Syntax stp tc-protection threshold number View undo stp tc-protection threshold System view Default level 2: System level Parameters number: Sets the maximum number of immediate forwarding address entry flushes that the device can perform within a certain period of time (10 seconds). The value ranges from 1 to 255. Description Use stp tc-protection threshold to configure the maximum number of forwarding address entry flushes that the device can perform every a certain period of time (10 seconds). Use undo stp tc-protection threshold to restore the default. By default, the device can perform a maximum of six forwarding address entry flushes every 10 seconds. Examples # Configure the device to perform up to 10 forwarding address entry flushes every 10 seconds. system-view [Sysname] stp tc-protection threshold 10 stp tc-snooping Syntax stp tc-snooping View undo stp tc-snooping System view Default level 2: System level 122