HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 203

qinq enable Syntax qinq enable View undo qinq enable Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters None Description Use qinq enable to enable basic QinQ on the Ethernet ports. Use undo qinq enable to disable basic QinQ on the Ethernet ports. By default, basic QinQ is disabled on Ethernet ports. A basic QinQ-enabled port tags received frames with its PVID tag. Configured in Layer 2 Ethernet interface view, the command takes effect on the port only. Configured in Layer 2 aggregate interface view, the command takes effect on the Layer 2 aggregate interface and all the member ports in the aggregation group. Examples # Enable basic QinQ on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] qinq enable qinq ethernet-type customer-tag Syntax qinq ethernet-type customer-tag hex-value View undo qinq ethernet-type customer-tag System view Default level 2: System level Parameters hex-value: Hexadecimal Tag Protocol Identifier (TPID) value, ranging from 0x0001 to 0xFFFF. However, do not set it to any of the protocol type values listed in Table 46. 195