HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 95
Spanning tree configuration commands, active region-configuration
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Spanning tree configuration commands active region-configuration Syntax View active region-configuration MST region view Default level 2: System level Parameters None Description Use active region-configuration to activate your MST region configuration. When you configure MST region-related parameters, MSTP launches a new spanning tree calculation process that may cause network topology instability. This is mostly likely to occur when you configure the VLAN-to-instance mapping table. The launch will only occur after you activate the MST region-related parameters by using active region-configuration command or enable MSTP by using the stp enable command. HP recommends that you use the check region-configuration command to determine whether the MST region configurations to be activated are correct. Run this command only when they are correct. Related commands: instance, region-name, revision-level, vlan-mapping modulo, and check region-configuration. Examples # Map VLAN 2 to MSTI 1 and manually activate the MST region configuration. system-view [Sysname] stp region-configuration [Sysname-mst-region] instance 1 vlan 2 [Sysname-mst-region] active region-configuration check region-configuration Syntax View check region-configuration MST region view Default level 2: System level 87