HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 127

stp region-configuration Syntax stp region-configuration View undo stp region-configuration System view Default level 2: System level Parameters None Description Use stp region-configuration to enter MST region view. Use undo stp region-configuration to restore the default MST region configurations. These are the default settings for the MST region: • The MST region name of the device is the MAC address of the device. • All VLANs are mapped to the CIST. • The MSTP revision level is 0. After you enter MST region view, you can configure the MST region-related parameters, including the region name, VLAN-to-instance mappings, and revision level. Examples # Enter MST region view. system-view [Sysname] stp region-configuration [Sysname-mst-region] stp root primary Syntax stp [ instance instance-id ] root primary View undo stp [ instance instance-id ] root System view Default level 2: System level Parameters instance instance-id: Configures the device as the root bridge in a particular MSTI. The value of instance-id ranges from 0 to 32, where 0 represents the CIST. 119