HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 112
region-name, reset stp
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
region-name Syntax region-name name View undo region-name MST region view Default level 2: System level Parameters name: Specifies the MST region name, a string of 1 to 32 characters. Description Use region-name to configure the MST region name. Use undo region-name to restore the default MST region name. By default, the MST region name of a device is its MAC address. The MST region name, the VLAN-to-instance mapping table, and the MSTP revision level of a device determine the device's MST region. After configuring this command, run the active region-configuration command to activate the configured MST region name. Related commands: instance, revision-level, vlan-mapping modulo, display stp region-configuration, check region-configuration, and active region-configuration. Examples # Set the MST region name of the device to hello. system-view [Sysname] stp region-configuration [Sysname-mst-region] region-name hello reset stp Syntax View reset stp [ interface interface-list ] User view Default level 1: Monitor level Parameters interface interface-list: Clears the MSTP statistics of the ports specified in the format of interface-list = { interface-type interface-number [ to interface-type interface-number ] }&, where & indicates that you can specify up to 10 ports or port ranges. 104