HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 15
Table 3, Command output, Field, Description
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
display interface gigabitethernet 1/0/1 GigabitEthernet1/0/1 current state: DOWN IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e2d2-58fb Description: GigabitEthernet1/0/1 Interface Loopback is not set Media type is not sure,Port hardware type is No connector 1000Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is force link Flow-control is enabled The Maximum Frame Length is 9216 Broadcast MAX-ratio: 100% Unicast MAX-ratio: 100% Multicast MAX-ratio: 100% Allow jumbo frame to pass PVID: 1 Mdi type: auto Port link-type: access Tagged VLAN ID : none Untagged VLAN ID : 1 Port priority: 0 Last clearing of counters: Never Peak value of input: 0 bytes/sec, at 2000-06-13 15:27:44 Peak value of output: 0 bytes/sec, at 2000-06-13 15:27:44 Last 300 seconds input: 0 packets/sec 0 bytes/sec 0% Last 300 seconds output: 0 packets/sec 0 bytes/sec 0% Input (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input (normal): 0 packets, - bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 0 packets, 0 bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Output (normal): 0 packets, - bytes 0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier Table 3 Command output Field GigabitEthernet1/0/1 current state IP Packet Frame Type Hardware address Description Description Physical state of the Ethernet interface. For more information, see Table 4. Ethernet framing format on the interface. Hardware address of the port. Description of the interface. 7