HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 78

G -- Defaulted, H -- Expired GigabitEthernet1/0/2: Aggregation Interface: Bridge-Aggregation2 Local: Port Number: 7 Port Priority: 32768 Oper-Key: 3 Flag: {ACG} Remote: System ID: 0x8000, 0000-0000-0000 Port Number: 0 Port Priority: 32768 Oper-Key: 0 Flag: {EF} Received LACP Packets: 0 packet(s) Illegal: 0 packet(s) Sent LACP Packets: 0 packet(s) Table 18 Command output Field Flags Aggregation Interface Local Port Priority Oper-key Flag Remote System ID Received LACP Packets Illegal Sent LACP Packets Description LACP state flags: • A-LACP is enabled. • B-Indicates the LACP short timeout. • C-The sending system detects that the link is aggregatable. • D-The sending system detects that the link is synchronized. • E-The sending system detects that the incoming frames are collected. • F-The sending system detects that the outgoing frames are distributed. • G-The sending system receives frames in the default state. • H-The sending system receives frames in the expired state. Aggregate interface to which the member port belongs. Information about the local end. Aggregation priority of the port. Operational key. LACP protocol state flag. Information about the remote end. Remote end system ID, comprising the system LACP priority and the system MAC address. Total number of LACP packets received. Total number of illegal packets. Total number of LACP packets sent. 70