HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 200

gvrp registration Syntax gvrp registration { fixed | forbidden | normal } View undo gvrp registration Ethernet interface view, Layer-2 aggregate interface view Default level 2: System level Parameters fixed: Sets the GVRP registration mode to fixed. forbidden: Sets the GVRP registration mode to forbidden. normal: Sets the GVRP registration mode to normal. Description Use gvrp registration to configure the GVRP registration mode. Use undo gvrp registration to restore the default. The default GVRP registration mode is normal. Settings in system view take effect globally; settings in Ethernet view or Layer 2 aggregate interface take effect on the current interface. This command is only available on trunk ports. Related commands: display garp statistics. Examples # Set the GVRP registration mode to fixed on port GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port link-type trunk [Sysname-GigabitEthernet1/0/1] gvrp registration fixed reset garp statistics Syntax View reset garp statistics [ interface interface-list ] User view Default level 2: System level Parameters interface interface-list: Clears the GARP statistics of one or multiple ports. You can provide up to 10 port lists, specified in the following ways: 192