HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 82

Table 20 Command output Field Loadsharing Type Port Status Flags Aggregation Interface Aggregation Mode System ID Local Port Status Priority Oper-Key Flag Remote Actor Partner Description Load sharing type: • Shar-Load sharing. • NonS-Non-load sharing. Port state: Selected or Unselected. LACP state flags: • A-LACP is enabled. • B-Indicates the LACP short timeout. • C-The sending system detects that the link is aggregatable. • D-The sending system detects that the link is synchronized. • E-The sending system detects that the incoming frames are collected. • F-The sending system detects that the outgoing frames are distributed. • G-The sending system receives frames in the default state. • H-The sending system receives frames in the expired state. Name of the aggregate interface. Mode of the aggregation group: • Static for static aggregation. • Dynamic for dynamic aggregation. Local system ID, comprising the system LACP priority and the system MAC address. Information about the local end. Port type and number. Port state: selected or unselected. Port aggregation priority. Operational key. LACP protocol state flag. Information about the remote end. Local port type and number. Remote port index. enable snmp trap updown Syntax enable snmp trap updown View undo enable snmp trap updown Layer 2 aggregate interface view Default level 2: System level 74