HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 185
voice vlan enable, voice vlan mac-address
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
voice vlan enable Syntax voice vlan vlan-id enable View undo voice vlan [ vlan-id ] enable Layer 2 Ethernet interface view Default level 2: System level Parameters vlan-id: Specifies a VLAN ID, in the range of 2 to 4096. Description Use voice vlan enable to enable the voice VLAN feature and configure a VLAN as the voice VLAN for the Ethernet port. Use undo voice vlan enable to disable the voice VLAN feature on an Ethernet port. By default, the voice VLAN feature is disabled on ports. Enable the voice VLAN feature on a hybrid or trunk port operating in automatic voice VLAN assignment mode, but not on an access port operating in automatic voice VLAN assignment mode. Examples # Enable the voice VLAN feature on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] voice vlan 2 enable voice vlan mac-address Syntax voice vlan mac-address mac-address mask oui-mask [ description text ] View undo voice vlan mac-address oui System view Default level 2: System level Parameters mac-address: Specifies a source MAC address of voice traffic, in the format of H-H-H. For example, 1234-1234-1234. mask oui-mask: Specifies the valid length of the OUI address by a mask in the format of H-H-H, formed by consecutive 1s and 0s. For example, FFFF-0000-0000. To filter the voice device of a specific vendor, set the mask to FFFF-FF00-0000. description text: Specifies a string of 1 to 30 case-sensitive characters that describes the OUI address. 177