HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 88

Description Use link-aggregation port-priority to set the aggregation priority of a port. Use undo link-aggregation port-priority to restore the default setting. The default aggregation priority of a port is 32768. Examples # Set the aggregation priority of port GigabitEthernet 1/0/1 to 64. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] link-aggregation port-priority 64 link-aggregation selected-port minimum Syntax link-aggregation selected-port minimum number View undo link-aggregation selected-port minimum Layer 2 aggregate interface view Default level 2: System level Parameters number: Specifies the minimum number of Selected ports in an aggregation group required to bring up the aggregate interface. This argument ranges from 1 to 8. Description Use link-aggregation selected-port minimum to configure the minimum number of Selected ports in the aggregation group. Use undo link-aggregation selected-port minimum to restore the default setting. By default, the minimum number of Selected ports in an aggregation group is not specified. Executing this command may cause all the member ports in the aggregation group to become unselected. The minimum numbers of Selected ports for the local and peer aggregation groups must be consistent. Examples # Configure the minimum number of Selected ports as 3 in the aggregation group corresponding to Layer 2 aggregate interface Bridge-Aggregation 1. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3 port link-aggregation group Syntax port link-aggregation group number 80