HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 129
stp root-protection, stp tc-protection
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
stp root-protection Syntax stp root-protection View undo stp root-protection Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters None Description Use stp root-protection to enable the root guard function on the ports. Use undo stp root-protection to restore the default. By default, the root guard function is disabled. Configured in Ethernet interface view, the setting takes effect only on the interface. Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface. Configured on a member port in an aggregation group, the setting takes effect only after the port leaves the aggregation group. You cannot configure root guard and loop guard on a port at the same time. Related commands: stp loop-protection. Examples # Enable the root guard function for GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] stp root-protection stp tc-protection Syntax stp tc-protection enable View stp tc-protection disable System view Default level 2: System level Parameters None 121