HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 34
loopback-detection interval-time, loopback-detection per-vlan enable
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Examples # Enable loopback detection on GigabitEthernet 1/0/1. system-view [Sysname] loopback-detection enable [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] loopback-detection enable loopback-detection interval-time Syntax loopback-detection interval-time time View undo loopback-detection interval-time System view Default level 2: System level Parameters time: Sets the loopback detection interval, ranging from 5 to 300 seconds. Description Use loopback-detection interval-time to set the loopback detection interval. Use undo loopback-detection interval-time to restore the default loopback detection interval. The default loopback detection interval is 30 seconds. Related commands: display loopback-detection. Examples # Set the loopback detection interval to 10 seconds. system-view [Sysname] loopback-detection interval-time 10 loopback-detection per-vlan enable Syntax loopback-detection per-vlan enable View undo loopback-detection per-vlan enable Ethernet interface view Default level 2: System level Parameters None 26