HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 84
lacp period short, lacp system-priority
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
[Sysname-Bridge-Aggregation1] lacp period short Syntax lacp period short View undo lacp period Ethernet interface view Default level 2: System level Parameters None Description Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (1 second). Use undo lacp period to restore the default setting. The default LACP timeout interval is the long timeout interval (30 seconds). Examples # Set the LACP timeout interval on GigabitEthernet 1/0/1 to the short timeout interval (1 second). system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] lacp period short lacp system-priority Syntax lacp system-priority system-priority View undo lacp system-priority System view Default level 2: System level Parameters system-priority: Specifies the LACP priority of the local system, in the range of 0 to 65535. The smaller the value, the higher the system LACP priority. Description Use lacp system-priority to set the LACP priority of the local system. Use undo lacp system-priority to restore the default setting. By default, the system LACP priority is 32768. 76