HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 138

VLAN configuration commands Basic VLAN configuration commands default Syntax View default VLAN interface view Default level 2: System level Parameters None Description CAUTION: The default command might interrupt ongoing network services. Make sure you are fully aware of the impacts of this command when you perform it on a live network. Use default to restore the default settings for a VLAN interface. This command might fail to restore the default settings for some commands for reasons such as command dependencies and system restrictions. You can use the display this command in interface view to check for these commands, and perform their undo forms or follow the command reference to individually restore their default settings. If your restoration attempt still fails, follow the error message to resolve the problem. Examples # Restore the default settings for VLAN-interface 1. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] default This command will restore the default settings. Continue? [Y/N]:y description Syntax description text undo description 130