HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 204
qinq ethernet-type service-tag
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Table 46 Common protocol type values Protocol type ARP PUP RARP IP IPv6 PPPoE MPLS IPX/SPX IS-IS LACP 802.1X Cluster Reserved Value 0x0806 0x0200 0x8035 0x0800 0x86DD 0x8863/0x8864 0x8847/0x8848 0x8137 0x8000 0x8809 0x888E 0x88A7 0xFFFD/0xFFFE/0xFFFF Description Use qinq ethernet-type customer-tag to configure the TPID value in CVLAN tags. Use undo qinq ethernet-type customer-tag to restore the TPID value in CVLAN tags to the system default. By default, the TPID value in CVLAN tags is 0x8100. On a port with basic QinQ enabled, the switch judges whether a frame is VLAN tagged based on the CVLAN TPID value globally configured. Examples # Set the TPID value in the CVLAN tags to 0x8200 globally. system-view [Sysname] qinq ethernet-type customer-tag 8200 qinq ethernet-type service-tag Syntax qinq ethernet-type service-tag hex-value View undo qinq ethernet-type service-tag Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters hex-value: Hexadecimal TPID value, ranging from 0x0001 to 0xFFFF. However, do not set it to any of the protocol type values listed in Table 46. 196