HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 123
stp pathcost-standard, stp point-to-point
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] stp no-agreement-check stp pathcost-standard Syntax stp pathcost-standard { dot1d-1998 | dot1t | legacy } View undo stp pathcost-standard System view Default level 2: System level Parameters dot1d-1998: Configures the device to calculate the default path cost for ports based on IEEE 802.1d-1998. dot1t: Configures the device to calculate the default path cost for ports based on IEEE 802.1t. legacy: Configures the device to calculate the default path cost for ports based on a private standard. Description Use stp pathcost-standard to specify a standard for the device to use when calculating the default path costs for ports. Use undo stp pathcost-standard to restore the default. By default, the switch calculates the default path cost for ports based on a private standard. If you change the standard that the device uses in calculating the default path costs, you restore the path costs to the default. Related commands: stp cost and display stp. Examples # Configure the device to calculate the default path cost for ports based on IEEE 802.1d-1998. system-view [Sysname] stp pathcost-standard dot1d-1998 stp point-to-point Syntax stp point-to-point { auto | force-false | force-true } View undo stp point-to-point Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level 115