HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 87

system-view [Sysname] undo link-aggregation load-sharing mode local-first link-aggregation mode Syntax link-aggregation mode dynamic View undo link-aggregation mode Layer 2 aggregate interface view Default level 2: System level Parameters None Description Use the link-aggregation mode dynamic command to configure an aggregation group to operate in dynamic aggregation mode. Use undo link-aggregation mode to restore the default setting. By default, an aggregation group operates in static aggregation mode. To change the aggregation mode of an aggregation group that contains member ports, remove all the member ports from the aggregation group first. Examples # Configure the aggregation group corresponding to Bridge-Aggregation 1 to operate in dynamic aggregation mode. system-view [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] link-aggregation mode dynamic link-aggregation port-priority Syntax link-aggregation port-priority port-priority View undo link-aggregation port-priority Ethernet interface view Default level 2: System level Parameters port-priority: Specifies a port aggregation priority, in the range of 0 to 65535. The smaller the value, the higher the port aggregation priority. 79