HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 231

View System view Default level 2: System level Parameters delay: Sets the LLDPDU transmit delay, ranging from 1 to 8192 seconds. Description Use lldp timer tx-delay to set the LLDPDU transmit delay. Use undo lldp timer tx-delay to restore the default. By default, the LLDPDU transmit delay is 2 seconds. It is a good practice to set the LLDPDU transmit delay to be no greater than a quarter of the LLDPDU transmit interval. If the LLDPDU transmit delay is greater than the LLDPDU transmit interval, the device uses the LLDPDUs transmit delay as the transmit interval. Related commands: lldp timer tx-interval. Examples # Set the LLDPDU transmit delay to 4 seconds. system-view [Sysname] lldp timer tx-delay 4 lldp timer tx-interval Syntax lldp timer tx-interval interval View undo lldp timer tx-interval System view Default level 2: System level Parameters interval: Sets the LLDPDU transmit interval, ranging from 5 to 32768 seconds. Description Use lldp timer tx-interval to set the LLDPDU transmit interval. Use undo lldp timer tx-interval to restore the default. By default, the LLDPDU transmit interval is 30 seconds. It is a good practice to set the LLDPDU transmit interval to be no less than four times the LLDPDU transmit delay. If the LLDPDU transmit interval is less than the LLDPDU transmit delay, the device uses the LLDPDUs transmit delay as the transmit interval. 223