HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 167
protocol-vlan
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Examples # Associate the hybrid port GigabitEthernet 1/0/1 with protocol 0 (IPv4) in VLAN 2. system-view [Sysname] vlan 2 [Sysname-vlan2] protocol-vlan ipv4 [Sysname-vlan2] quit [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port link-type hybrid [Sysname-GigabitEthernet1/0/1] port hybrid vlan 2 untagged Please wait... Done [Sysname-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 2 0 # Associate the hybrid Layer 2 aggregate interface Bridge-Aggregation 1 with protocol 0 in VLAN 2. system-view [Sysname] vlan 2 [Sysname-vlan2] protocol-vlan ipv4 [Sysname-vlan2] quit [Sysname] interface bridge-aggregation 1 [Sysname-Bridge-Aggregation1] port link-type hybrid [Sysname-Bridge-Aggregation1] port hybrid vlan 2 untagged Please wait... Done Configuring GigabitEthernet1/0/1... Done. Configuring GigabitEthernet1/0/2... Done. Configuring GigabitEthernet1/0/3... Done. [Sysname-Bridge-Aggregation1] port hybrid protocol-vlan vlan 2 0 The output shows that GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 are the member ports of the aggregation group corresponding to Bridge-Aggregation 1. protocol-vlan Syntax protocol-vlan [ protocol-index ] { at | ipv4 | ipv6 | ipx { ethernetii | llc | raw | snap } | mode { ethernetii etype etype-id | llc { dsap dsap-id [ ssap ssap-id ] | ssap ssap-id } | snap etype etype-id } } View undo protocol-vlan { protocol-index [ to protocol-end ] | all } VLAN view Default level 2: System level Parameters at: Specifies the AppleTalk based VLAN. ipv4: Specifies the IPv4 based VLAN. ipv6: Specifies the IPv6 based VLAN. ipx: Specifies the IPX based VLAN. The keywords ethernetii, llc, raw, and snap are encapsulation formats for IPX. 159