HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 198

garp timer leave Syntax garp timer leave timer-value View undo garp timer leave Ethernet interface view, Layer-2 aggregate interface view Default level 2: System level Parameters timer-value: Leave timer (in centiseconds), which must be a multiple of 5 and range from twice the Join timer (exclusive) to the LeaveAll timer (exclusive). Description Use garp timer leave to set the GARP Leave timer for an Ethernet port or Layer-2 aggregate interface. Use undo garp timer leave to restore the default of the GARP Leave timer. This may fail if the default is beyond the valid value range for the Leave timer. By default, the Leave timer is set to 60 centiseconds. Related commands: display garp timer, garp timer join, and garp timer leaveall. Examples # Set the GARP Leave timer to 100 centiseconds, assuming that both the Join timer and the LeaveAll timer are using the default. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] garp timer leave 100 garp timer leaveall Syntax garp timer leaveall timer-value View undo garp timer leaveall System view Default level 2: System level Parameters timer-value: Leaveall timer (in centiseconds), which must be a multiple of 5 and range from the maximum Leave timer on the device (exclusive) to 32765 (inclusive). Description Use garp timer leaveall to set the GARP LeaveAll timer. 190