HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 14
display interface, Syntax, Default level, Parameters, Description, Examples
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Field Multicast (pkts/sec) Overflow: more than 14 decimal digits. --: not supported. Description Average rate (packets per second) of receiving or sending multicast packets during the sampling interval. The command displays Overflow, if any of the following applies: • The data length of an error statistic is greater than 7 decimal digits. • The data length of a non-error statistic is greater than 14 decimal digits. The statistical item is not supported. display interface Syntax display interface [ interface-type ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ] View display interface interface-type interface-number [ brief ] [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters interface-type: Specifies an interface type. interface-number: Specifies an interface number. brief: Displays brief interface information. If you do not specify this keyword, the command displays detailed interface information. down: Displays information about interfaces in down state and the causes. If you do not specify this keyword, this command displays information about interfaces in all states. |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display interface to display Ethernet interface information. If no interface type is specified, this command displays information about all interfaces. If an interface type is specified but no interface number is specified, this command displays information about all interfaces of that type. Related commands: interface. Examples # Display detailed information about interface GigabitEthernet 1/0/1. 6