HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 116
stp config-digest-snooping, stp cost
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
stp config-digest-snooping Syntax stp config-digest-snooping View undo stp config-digest-snooping System view, Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters None Description Use stp config-digest-snooping to enable Digest Snooping. Use undo stp config-digest-snooping to disable Digest Snooping. The feature is disabled by default. Configured in system view, the setting takes effect globally. Configured in Ethernet interface view, the setting takes effect on the interface only. Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface. Configured on a member port in an aggregation group, the setting takes effect only after the port leaves the aggregation group. Enable this feature both globally and on ports connected to other vendors' devices to make it effective. To minimize impact, enable the feature on all associated ports before you enable it globally. Related commands: display stp. Examples # Enable Digest Snooping on GigabitEthernet 1/0/1 and then globally. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] stp config-digest-snooping [Sysname-GigabitEthernet1/0/1] quit [Sysname] stp config-digest-snooping stp cost Syntax stp [ instance instance-id ] cost cost undo stp [ instance instance-id ] cost View Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level 108