HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 111

Table 31 Command output Field Port Receive Send Description Port name. Number of TC/TCN BPDUs received on each port. Number of TC/TCN BPDUs sent by each port. instance Syntax instance instance-id vlan vlan-list View undo instance instance-id [ vlan vlan-list ] MST region view Default level 2: System level Parameters instance-id: Specifies an MSTI ID. The value of instance-id ranges from 0 to 32, where 0 represents the CIST. vlan vlan-list: Specifies a VLAN list in the format of vlan-list = { vlan-id [ to vlan-id ] }&, where the vlan-id argument represents the VLAN ID, in the range of 1 to 4094, and & indicates that you can specify up to 10 VLAN IDs or VLAN ID ranges. Description Use instance to map a list of VLANs to the specified MSTI. Use undo instance to remap the specified VLAN or all VLANs to the CIST (MSTI 0). By default, all VLANs are mapped to the CIST. If you specify no VLAN in the undo instance command, all VLANs mapped to the specified MSTI will be remapped to the CIST. You cannot map the same VLAN to different MSTIs. If you map a VLAN that has been mapped to an MSTI to a new MSTI, the old mapping will be automatically removed. After configuring this command, run the active region-configuration command to activate the VLAN-to-instance mapping. Related commands: display stp region-configuration, check region-configuration, and active region-configuration. Examples # Map VLAN 2 to MSTI 1. system-view [Sysname] stp region-configuration [Sysname-mst-region] instance 1 vlan 2 103