HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 172

port hybrid ip-subnet-vlan Syntax port hybrid ip-subnet-vlan vlan vlan-id View undo port hybrid ip-subnet-vlan { vlan vlan-id | all } Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094. all: Specifies all VLANs. Description Use port hybrid ip-subnet-vlan to associate the Ethernet port with the specified IP subnet-based VLAN. Use undo port hybrid ip-subnet-vlan to remove the association. On an Ethernet port associated with an IP subnet-based VLAN, if the source IP address of a received untagged packet belongs to the corresponding IP subnet, the port tags the packet with the corresponding VLAN tag. The configuration made in Layer 2 Ethernet interface view applies only to the port. The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its aggregation member ports. • If the system fails to apply the configuration to the aggregate interface, it stops applying the configuration to aggregation member ports. • If the system fails to apply the configuration to an aggregation member port, it skips the port and moves to the next member port. Only hybrid ports support this feature. Before you use this command, assign the port to the IP subnet-based VLAN you want to associate with. Related commands: display ip-subnet-vlan interface. Examples # Associate GigabitEthernet 1/0/1 with the IP subnet-based VLAN 3. system-view [Sysname] vlan 3 [Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0 [Sysname-vlan3] quit [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] port link-type hybrid [Sysname-GigabitEthernet1/0/1] port hybrid vlan 3 untagged Please wait... Done. [Sysname-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 3 # Associate the hybrid Layer 2 aggregate interface Bridge-Aggregation 1 with the IP subnet-based VLAN 3. 164