HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 171
ip-subnet-vlan, Table 39, Command output
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Table 39 Command output Field Subnet Index IP Address Subnet Mask Description IP subnet index. IP address of the subnet. It can be an IP address or a network address. Mask of the IP subnet. ip-subnet-vlan Syntax ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ] View undo ip-subnet-vlan { ip-subnet-index [ to ip-subnet-end ] | all } VLAN view Default level 2: System level Parameters ip-subnet-index: Specifies a beginning IP subnet index, in the range of 0 to 11. The value can be configured by users, or automatically numbered by the system, based on the order in which the IP subnets or IP addresses are associated with the VLAN. ip ip-address [ mask ]: Specifies the source IP address or network address based on which the subnet-based VLANs are classified, in dotted decimal notation. The mask argument is the subnet mask of the source IP address or network address, in dotted decimal notation with a default value of 255.255.255.0. to: Specifies an IP subnet index range. ip-subnet-end: Specifies an end IP subnet index, in the range of 0 to 11. The value must be greater than or equal to the beginning IP subnet index. all: Removes all the associations between VLANs and IP subnets or IP addresses. Description Use ip-subnet-vlan to associate the VLAN with a specified IP subnet or IP address. Use undo ip-subnet-vlan to remove the association. The IP subnet or IP address cannot be a multicast network segment or a multicast address. Related commands: display ip-subnet-vlan vlan. Examples # Configure VLAN 3 as an IP subnet-based VLAN and associate it with the 192.168.1.0/24 network segment. system-view [Sysname] vlan 3 [Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0 163