HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 28

In system view, use the flow-interval command to set the statistics polling interval for all interfaces. In Ethernet interface view, use the flow-interval command to set the statistics polling interval for the interface. Examples # Set the statistics polling interval to 100 seconds on GigabitEthernet 1/0/1. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] flow-interval 100 interface Syntax View interface interface-type interface-number System view Default level 2: System level Parameters interface-type interface-number: Specifies an interface type and number. Description Use interface to enter interface view. Examples # Enter GigabitEthernet 1/0/1 interface view (assuming that the interface is an Ethernet interface). system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] jumboframe enable Syntax jumboframe enable [ value ] View undo jumboframe enable Ethernet interface view Default level 2: System level Parameters value: Sets the maximum length of Ethernet frames that are allowed to pass through, ranging from 1536 to 9216 bytes. If you set the value argument multiple times, the latest configuration takes effect. 20