HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 177
isolate-user-vlan enable, port isolate-user-vlan promiscuous
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
isolate-user-vlan enable Syntax isolate-user-vlan enable View undo isolate-user-vlan enable VLAN view Default level 2: System level Parameters None Description Use isolate-user-vlan enable to configure the VLAN as an isolate-user-VLAN. Use undo isolate-user-vlan enable to remove the isolate-user-VLAN configuration for the VLAN. By default, no VLAN is an isolate-user-VLAN. An isolate-user-VLAN may include multiple ports, including the one connected to the upstream device. Do not configure the default VLAN (VLAN 1) as a secondary VLAN or isolate-user-VLAN. Related commands: display isolate-user-vlan. Examples # Configure VLAN 5 as an isolate-user-VLAN. system-view [Sysname] vlan 5 [Sysname-vlan5] isolate-user-vlan enable port isolate-user-vlan promiscuous Syntax port isolate-user-vlan vlan-id promiscuous undo port isolate-user-vlan View Layer 2 Ethernet interface view, Layer 2 aggregate interface view Default level 2: System level Parameters vlan-id: Specifies a VLAN ID, in the range of 2 to 4094. Description Use port isolate-user-vlan promiscuous to configure a port to operate in promiscuous mode in a VLAN. Use undo port isolate-user-vlan to restore the default. By default, a port does not operate in promiscuous mode or host mode in a VLAN. 169