HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 101

cfgCreate cfgCreate Create a zone configuration. Synopsis cfgCreate "cfgName","member;member" Availability Admin Release V3.1.x and V4.1.x Description Use this command to create a new zone configuration. A zone configuration name must begin with a letter and can be followed by any number of letters, numbers, and the underscore character. Names are case sensitive, for example, "Cfg_1" and "cfg_1" are different zone configurations. Blank spaces are ignored. The zone configuration member list must have at least one member. Empty member lists are not allowed. This command changes the Defined Configuration. For the change to be preserved across switch reboots, it must be saved to non-volatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Refer to the zonecreate command for more information on name and member specifications. Note: This command requires an Advanced Zoning license. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 101