HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 661

qlPortDisable qlPortDisable Disable a QuickLoop port. Synopsis qlPortDisable port Availability Admin Release V3.1.x Description Use this command to change the specified port from QuickLoop mode to fabric mode. This excludes any devices connected to the port from the QuickLoop, and causes the switch to re-initialize the QuickLoop. If the switch that the port belongs to has a partner that is running in QuickLoop mode, both switches re-initialize the QuickLoop to form a loop that excludes any devices connected to the specified port. If the qlPortDisable command is entered for a port, the qlEnable command has no effect on that port, because it has been removed from QuickLoop management. The port must be re-enabled using the qlPortEnable command. The specified port must be in QuickLoop mode for this command to have effect. Note: This command requires an Advanced Zoning license. Operands This command has the following operand: port Specify the port number to be modified from QuickLoop mode to fabric mode. Valid values for port number vary depending on the switch type. This operand is required. Fabric OS Version 3.1.x/4.1.x Reference Guide 661