HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 798

Fabric OS Commands port1 (V4.1.x only) port2 (V4.1.x only) lines (V4.1.x only) Specify the first port of a range of ports to display information. Enter the port area number. The default (if no operand specified) is to print state of port 0. If only startPort is specified, only information for startPort is printed. This operand is required. Specify the last port of range of ports to display information. Enter the port area number. If startPort is specified but endPort is not specified, only endPort information is printed for the port based commands (portshow, portregshow, portrouteshow). If no operand is supplied, startPort is set to 0 and endPort is set to maximum port of switch. This operand is required. Specify the number of lines output from this command. This operand is optional. Example To display switch information for debugging: switch:admin> supportshow Kernel: Fabric OS: Made on: Flash: BootProm: 5.3.1 v3.1 Tue Apr 6 16:57:22 PDT 2002 Thu Apr 1 10:23:43 PST 2002 Thu Oct 1 13:34:29 PDT 2002 Up for: 12 secs Powered for: 472 days, 19:15 Last up at: Tue May 2 10:48:21 2000 Reason: Reboot 37 34 37 45 49 Centigrade 98 93 98 113 120 Fahrenheit Power Supply #1 is absent Power Supply #2 is absent byRdzdSRxyczSe0D: Web license Diagnostics Status: Tue Apr 6 16:22:34 1999 < ... sample output truncated ... > 798 Fabric OS Version 3.1.x/4.1.x Reference Guide