HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 133

cmemRetentionTest Operands This command has the following operands: passcount (V3.1.x only) --slot number (V4.1.x only) -passcnt count (V4.1.x only) -datatype type (V4.1.x only) -ports itemlist (V4.1.x only) -seed value (V4.1.x only) Specify the number of times to execute this test. The default value is 1. This operand is optional. Specify the slot number that the diagnostic will operate on. The ports specified will be relative to this slot number. The default is set to 0 and designed to operate on fixed port count products. Specify the number of test passes to run. By default the test will be run one time. Specify the type of data pattern to use. By default, type 9, QUAD_RAMP is used. For a complete list of supported data patterns run the datatypeshow command. Some common settings are: Pattern type example BYTE_FILL 1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WORD_FILL 2 0000 0000 0000 0000 0000 0000 0000 0000 QUAD_FILL 3 00000000 00000000 00000000 00000000 QUAD_RAMP 9 00000000 00000001 00000002 00000003 RANDOM 11 55 16 fc d7 17 65 a9 87 5f 44 be 5a d0 de bc a5 Specify a set of ports to test. Specify a list of blade ports to test. The Ports list is translated into a matching quad list before the test is run. By default all the blade ports in the specified slot (--slot) are tested. See the itemlist help pages for further details. Specify the data pattern seed to be used. The default seed value is 0. Example To run the data retention test on the central memory SRAMS: switch:admin> cmemRetentionTest Running CMEM Retention Test ... passed. Fabric OS Version 3.1.x/4.1.x Reference Guide 133