HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 745

sensorShow sensorShow Displays sensor readings. Synopsis sensorShow Availability All users. Release V3.1.x and V4.1.x Description Use this command to display the current temperature, fan and power supply status, and readings from sensors located on the switch. The actual location of the sensors varies depending on the switch type. Using V4.1.x with the StorageWorks Core switch, the information returned with sensorShow is specific to the logical switch you are logged into: ■ If you are logged into Logical switch 0, sensors 1 through 4 are for switch blade slots 1 through 4, respectively. Sensors 5 and 6 are for the two CPs in slots 5 and 6, respectively. ■ If you are logged into Logical switch 1, sensors 1 and 2 are for the two CPs in slots 5 and 6, respectively. Sensors 3 through 6 are for switch blade slots 7 through 10, respectively. ■ If you are logged into the Active CP through the console port, you are prompted to specify the logical switch this command is executed on. If you log in to the Active CP through the Fabric OS shell, this command always executes on the default switch (logical switch 0). ■ Regardless of logical switch, sensors 7 through 9 are for the three chassis fans, left to right, and sensors 10 through 13 are for the four chassis power supplies, bottom to top. Operands None. Fabric OS Version 3.1.x/4.1.x Reference Guide 745