HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 539

portcfgislmode portcfgislmode Enable or disable ISL R_RDY Mode on a port. Synopsis: V3.1.x portcfgislmode portnumber, [1 | 0] Synopsis: V4.1.x portcfgislmode [slotnumber/]portnumber, [1 | 0] Availability Admin Release V3.1.x and V4.1.x Description Use this command to enable or disable ISL R_RDY Mode on a port. If enabling ISL R_RDY Mode on a port make sure the PID format is consistent across the entire fabric. Refer to the configure command for more information on the Core PID format. Use the portcfgshow command to view the enabled modes on a port. Operands This command has the following operands: slotnumber (V4.1.x only) Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Fabric OS Version 3.1.x/4.1.x Reference Guide 539