HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 843

systemverification systemverification Run a suit of diagnostic tests on all switches in a fabric. Synopsis systemverification [-parameters | -short] Availability Admin Release V4.1.x Description Use this command to run a comprehensive system wide test of all switches in a fabric. It will initiate a burnin run on all switches within the current system. The run can be terminated by issuing a control "c" character from the initiating terminal. All of the burnin features are operational during the systemverification command. The burninerrshow will display the stored burnin errlogs, the logs by blade are saved in /var/log/switchburnin.. files. On the fixed port count products, the slot defaults to 0. The command monitors the testing, and will terminate the burnin activity if all the elements have failed. Each failing slot will only output the first observed fail. Since this monitoring is a polling activity, the command number output may not be the exact command number that failed. After the testing has terminated, burninstatus command is output, and the burninerrshow messages for the failing slots are output. If all slots pass, then only the burninstatus command output is displayed. The burnin tests are designed to operate with switches connected to a fabric and restricts the frame loopback to inside the unit. If loopback plugs are installed in all ports, the burnin parameter min_lb_mode can be changes to 1 to test the fibre channel through the loopback plug. Fabric OS Version 3.1.x/4.1.x Reference Guide 843