HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 868

Fabric OS Commands --slot number (V4.1.x only) -passcnt count (V4.1.x only) -ports itemlist (V4.1.x only) Specify the slot number in a StorageWorks Core switch. The slot number must be followed by a slash ( / ) and the port number. The StorageWorks Core switch has a total of 10 slots counted from 1 to 10. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are switch cards. On each switch card, there are 16 ports counted from the bottom, 0 to 15. A particular port must be represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). This operand is not required for switches that do not have slots. Specify the number of times to perform this test. The default value is 1. This operand is optional. Specify a list of blade ports to test. By default all the blade ports in the specified slot are tested. See the itemlist command help page for more information. This operand is optional. Example To execute this test (V3.1.x example): switch:admin> turboRamTest Running Turbo RAM Test ........ passed. To execute this test (V4.1.x example): switch:admin> > turboramtest -passcnt 2 -ports 2/0-2/63 Running Turbo RAM Test ........ passed. Errors When it detects failures, the subtest may report one or more of the following error messages: DIAG-WTEST - Memory fill operation failed. DIAG-INC_RWTEST - Memory r-m-w increment subtest failed. DIAG-DEC_RWTEST - Memory r-m-w decrement subtest failed. DIAG-RAMINIT_TO - Memory initialization timed out. 868 Fabric OS Version 3.1.x/4.1.x Reference Guide