HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 507

perfDelFilterMonitor Operands This command has the following operands: slotnumber (V4.1.x only) portnumber monitorId Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify a port number. Valid values for port number vary depending on the switch type. This operand is required. Specify the monitor number you want to delete. Monitor numbers are defined when you create the monitor on a port. This operand is optional. If no operand is specified, all monitors on the port are deleted. Example To delete filter monitor 4 on blade 2 port 3: switch:admin> perfDelFilterMonitor 2/3, 4 The specified filter-based monitor is deleted. switch:admin> switch:admin> perfdelfiltermonitor 3 This will remove ALL monitors on port 3, continue? (yes, y, no, n): [no] y switch:admin> See Also perfShowFilterMonitor perfAddUserMonitor Fabric OS Version 3.1.x/4.1.x Reference Guide 507