HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 574

Fabric OS Commands Operands Cmd Defined by the event. Refer to the HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User Guide for more information. Args Displays more information about the event. For ioctl events, these are the I/O control arguments For Tx and Rx, these are the first two header words and word four of the FC-PH frame along with the first word of the payload and internal decoding field. For a full explanation of the information displayed by this command refer to the HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User Guide. This command has the following operands: count saved portid Specify the maximum number of lines to be displayed. Only the most recent count entries are displayed. This operand is optional. Specify a nonzero value to display the saved port log from the last switch fault. See uptime for conditions that cause a fault. The count operand is ignored when displaying the saved log. This operand is optional. Specify the port to be displayed. All other ports will not be displayed. This operand is optional. Example To display the port log: switch:admin> portlogdump 10 time task event port cmd args 16:51:15.499 tShell ioctl 7 de 10f9bb90,0 16:51:15.499 tShell ioctl 8 de 10f9bb90,0 16:51:15.499 tShell ioctl 9 de 10f9bb90,0 16:51:15.499 tShell ioctl 10 de 10f9bb90,0 16:51:15.499 tShell ioctl 11 de 10f9bb90,0 16:51:15.499 tShell ioctl 12 de 10f9bb90,0 16:51:15.499 tShell ioctl 13 de 10f9bb90,0 16:51:15.499 tShell ioctl 14 de 10f9bb90,0 16:51:15.499 tShell ioctl 15 de 10f9bb90,0 16:58:28.383 tShell create tSyslog switch:admin> 574 Fabric OS Version 3.1.x/4.1.x Reference Guide