HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 703

secpolicyadd secpolicyadd Add members to an existing policy. Synopsis secpolicyadd "name", "member;member" Availability Admin Release V3.1.x and V4.1.x Description Use this command to add members to an existing access policy. The new members must not already be members within the policy or the command fails. Each policy corresponds to a management method. The list of members of a policy acts as an access control list for that management method. When security is first enabled using the secmodeenable command only the FCS_POLICY exists. Before a policy is created, there is no enforcement for that management method, that is, all access is granted. After a policy has been created and a member has been added to the policy, that policy becomes closed to all access except from included members. If all members are then deleted from the policy, all access is denied for that management access method (the DCC_POLICY and OPTIONS_POLICY are exceptions). Note: When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 703