HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 655

qloopRemove qloopRemove Remove a member from a QuickLoop. Synopsis qloopRemove "qloopName", "member;member" Availability Admin Release V3.1.x and V4.1.x Description Use this command to remove one or more members from a QuickLoop. The member list is identified through an exact string match; therefore, when removing multiple members, order is important. For example, if a QuickLoop contains "wwn3; wwn4", removing "wwn3; wwn4" succeeds, but removing "wwn4; wwn3" fails. If all members are removed, the QuickLoop is deleted. When a configuration is enabled, all QuickLoops defined in the configuration must resolve to one or two switch World Wide Names. This command changes the Defined Configuration. For the change to be preserved across switch reboots, it must be saved to non-volatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Note: This command requires an Advanced Zoning license. When security is enabled, this command can only be issued from the Primary FCS switch. See "Security Commands" on page 941. Fabric OS Version 3.1.x/4.1.x Reference Guide 655