HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 261

fashow fashow Displays Fabric Assist Information. Synopsis fashow Availability All users. Release V3.1.x Description This command displays information about Fabric Assist host ports. This command will display the port number and PID for each Fabric Assist host port located on this switch. It will also display a listing of each Target that has a Fabric Assist phantom on the host's port. The target's PID, assigned phantom AL_PA, preferred AL_PA and current online/offline status will all be displayed. The message "No Fabric Assist Host Ports on this Switch" is displayed if Fabric Assist is disabled, or if there are no Fabric Assist host ports on the switch. If the switch was unable to assign a phantom for the target then the message "No Phantom" will be displayed in the Status column. This switch will be unable to create a phantom if there are no available AL_PAs on the loop, or if there are more than 125 phantoms zoned to hosts on any one switch. If the preferred AL_PA can not be assigned as the target's AL_PA, then the AL_PA field of the target will be left blank and "AL_PA Conflict" will be displayed in the Status column. In this situation the target's phantom won't be created. Fabric OS Version 3.1.x/4.1.x Reference Guide 261