HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 201

diagsetburnin diagsetburnin Initializes the blade for a burn-in run. Synopsis diagsetburnin [--slot slotnumber][script | -current] Availability Admin Release V4.1.x Description This sets up the blade burnin parameters for the registered burnin script. The name of burnin script can be set with burninname command alternatively. The burnin will start at the next run of POST on the designated blades. The errors and activity logs are stored in non-volatile memory. The activity log of the script is saved in /var/log/scriptname.slot.log. The errors produced are available from burninerrshow command on a per blade basis. When power cycles occur, the burnin activity is restarted at the test that was interrupted at the time of the power cycle. This command does not require a reboot to take effect. Operands This command has the following operands: --slot slotnumber script -current Specify which slot number to to update. If this option is not specified at all, then all slots on the switch are setup for burnin. Specify the name of the burnin script to run. Set the name of burnin script to current burnin script. Fabric OS Version 3.1.x/4.1.x Reference Guide 201