HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 156

Fabric OS Commands RSCN Transmission Mode The RSCN Transmission Mode field is as follows: End-device RSCN Transmission Mode Specify 0 for RSCN with single PID, 1 for RSCN with multiple PIDs, or 2 fabric RSCN. The default value is 0. NS Operation Parameters The NS Pre-zoning Mode field is as follows: Pre-zoned Responses Mode Specify 0 for Standard Mode, or 1 for Pre-zoning On. The default value is 0. Arbitrated Loop Parameters The Arbitrated Loop Setting fields are as follows: Table 4: Configure Command Arbitrated Loop Settings Field Alternate BB Credit? (V4.1.x only) Send FAN frames? Enable CLOSE on OPEN received? Always send RSCN? Do Not Allow AL_PA 0x00? Initialize All Looplets? (V3.1.x only) Default 0 1 0 1 0 0 Range 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 Descriptions of the Arbitrated Loop Parameter fields are as follows: Send FAN frames? Enable CLOSE on OPEN received? Specifies that fabric address notification (FAN) frames be sent to public loop devices to notify them of their node ID and address. When set to 1, frames are sent; when set to 0, frames are not sent. If this is set, a CLS is returned immediately to an OPN if no buffers are available. This is required for TachLite. 156 Fabric OS Version 3.1.x/4.1.x Reference Guide