HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS V3.1.x/4.1.x Reference Guide - Page 613

portswap portswap Swap area numbers of two switch ports. Synopsis portswap [slotnumber/]port1 [slotnumber/]port2 Availability Admin Release V4.1.x Description Use this command to swap area numbers for a pair of switch ports. Both switch ports must be disabled prior to executing this command. The portswap command cannot be used unless the feature is first enabled with the portswapenable command. Operands This command has the following operands: slotnumber port1 port2 Specify the slot number for a StorageWorks Core switch. For all other switches this operand is not required. The slot number must be followed by a slash ( / ) and the port number, so that each port is represented by both slot number (1 through 4, or 7 through 10), and port number (0 through 15). The StorageWorks Core switch has a total of 1-10 slots. Slot number 5 and 6 are control processor cards, and slot 1 through 4, and 7 through 10, are port cards. On each port card, there are 16 ports counted from the bottom, 0 to 15. Specify the port number where you want to swap the area ID number. Specify the port number where you want to swap the port1 area ID number. Fabric OS Version 3.1.x/4.1.x Reference Guide 613